Skip to product information
1 of 4

Athena Precision

Sig P365 to Trijicon RMR Steel Red Dot Adapter Plate

Sig P365 to Trijicon RMR Steel Red Dot Adapter Plate

Regular price $65.00 USD
Regular price Sale price $65.00 USD
Sale Sold out
Shipping calculated at checkout.
This precision-machined adapter plate allows for the mounting of the Trijicon RMR, to the Sig P365. We take immense pride in the aesthetics and quality of the parts we produce. Every product is engineered, manufactured, finished, and shipped from our shop in Salt Lake City, Utah. Each part is inspected with calibrated precision measuring tools and checked against a model print to maintain the tightest tolerances.

Fits: Sig P365 to RMR.
**May fit other models, listed is what we've tested.**
All mounting hardware needed comes with the order.

Specifications:

Material: Precision machined, heat-treated 4140 alloy steel.

Finish: Coated with a copper phosphate to aid in corrosion resistance.

Hardware: M3 x 0.5 x 8mm  &  4-40 x 5/16 screws.


Install instructions for the Sig P365 to RMR adapter plate:
1- Make sure the surfaces and threads are clean and free from debris. Apply a light coat of oil or grease to the adapter plate to prevent rusting.  
2- Loctite 222 (purple) is recommended. Absolutely under no circumstances should any red, green, or blue thread lockers be used.  
3- Put a drop of 222 on the internal threads and on the thread's screws.
4- Use the supplied M3 x 0.5 x 8mm  &  4-40 x 5/16 screws.
5- Very Important Note:  Use a reliable torque driver set 17 IN. LBS
6- Allow to cure for 24 hours.

SKU:SIG-P36-TO-TRJ

View full details